| Dimensional range [mm] | |||||
|---|---|---|---|---|---|
| h1, h2 | b | g | t | Imin | Imax |
| 200 ÷ 2000 | 100 ÷ 550 | 7 ÷ 60 | 7 ÷ 60 | 4000 | 16000 |
At the Customer’s request, it is possible to manufacture them in dimensions outside the range stated above.
Standard and steel grades
PN-EN 10025-2
S235JR, S235J0, S235J2
S275JR, S275J0, S275J2
S355JR, S355J0, S355J2
At the Customer’s request, the product may be manufactured in other steel grades.
Technical conditions of manufacture
Dimensions and manufacturing tolerances according to PN-H-93453, PN-EN 1090-2, PN-EN-ISO-13920, standards, or according to individual arrangements regarding geometry, technical and quality conditions.
Length
Welded sections are manufactured in accordance with the lengths ordered and with the tolerance of 0/+100 mm.It is possible to make the length according to the documentation and / or the agreed tolerance.
Corrosion prevention
It is possible to perform anticorrosive protection with primer paint or a full painting set according to the arrangements.