| Dimensional range [mm] | |||||||
|---|---|---|---|---|---|---|---|
| h | b | g | t | Imin | Imax | ||
| 200 ÷ 2000 | 100 ÷ 550 | 7 ÷ 60 | 7 ÷ 60 | 4700 | 16000 | ||
At the customer’s request, it is possible to manufacture them in dimensions outside the range stated above.
Standard and steel grades
PN-EN 10025-2
S235JR, S235J0, S235J2,
S275JR, S275J0, S275J2,
S355JR, S355J0, S355J2
At the Customer’s request, the product may be manufactured in other steel grades
Technical conditions of manufacture
Dimensions and manufacturing tolerances accordingto PN-H-93453, PN-EN 1090-2, PN-EN-ISO-13920, standards, or according to individual arrangements regarding geometry, technical and quality conditions.
Length
Welded sections are manufactured in accordance with the lengths ordered and with the tolerance of 0/+100 mm. It is possible to make the length according to the documentation and / or the agreed tolerance.
Corrosion prevention
It is possible to perform anticorrosive protection with primer paint or a full painting set according to the arrangements.