| Dimensional range [mm] | |||||||
|---|---|---|---|---|---|---|---|
| h | b | g | t | Imin | Imax | ||
| 200 ÷ 2000 | 100 ÷ 550 | 5 ÷ 70 | 5 ÷ 70 | – | 16000 | ||
At the customer’s request, there is a possibility of making dimensions outside the given range.
The specified dimension range includes HKS, IKS, IKSH and IPBS welded I-sections.
The welded section is manufactured on one of two Granger submerged arc welding lines.
STEEL GRADES
PN-EN 10025-2:2004
S235JR, S235J0, S235J2
S275JR, S275J0, S275J2
S355JR, S355J0, S355J2
At the Customer’s request, the product may be manufactured in other steel grades
TECHNICAL CONDITIONS OF MANUFACTURE
Dimensions and manufacturing tolerances according to PN-H-93453, PN-B-06200, PN-EN 1090-2, PN-EN-ISO-13920, PN-S-10050 standards or according to individual arrangements regarding geometry, technical and quality conditions.
LENGTH
Welded sections are manufactured in accordance with the lengths ordered and with the tolerance of 0/+100 mm.
Corrosion prevention
It is possible to perform anticorrosive protection with primer
paint or a full painting set according to the arrangements.