Box beams through penetration welds
| Dimensional range [mm] | ||||
|---|---|---|---|---|
| h | b | g | t | cmin |
| 250 ÷ 1000 | 100 ÷ 400 (1000) | 7 ÷ 28 (60) | 7 ÷ 60 | 3s |
where: s – thickness of fi llet welds
At the Customer’s request, it is possible to manufacture them in dimensions outside the range stated above.
Standard and steel grades
PN-EN 10025-2:2004
S235JR, S235J0, S235J2
S275JR, S275J0, S275J2
S355JR, S355J0, S355J2
At the Customer’s request, the product may be manufactured in other steel grades.
Technical conditions of manufacture
Dimensions and manufacturing tolerances according to PN-EN 1090-2, PN-EN-ISO-13920, standards or according to individual arrangements regarding geometry, technical and quality conditions.
Length
The length depends on the beam weight. Maximum weight of the beam is up to 35 Mg.
Corrosion prevention
It is possible to perform anticorrosive protection with primer paint or a full painting set according to the arrangements. It is possible to make the length according to the documentation and / or the agreed tolerance.